Motorola MTM800 Product Information Manual page 139

Tools Menu (Administrator Login)
2. The CPS will read the codeplug from the attached terminal and determine its Serial Number.
3. The reading in progress will be displayed. It is possible to cancelling the read operation.
4. The CPS will look for the backup codeplug file according to the Radio Serial Number, at the
path indicated in the Default Backup Path field in the Directories Options dialogue box.
5. When the backup codeplug file is found, the CPS will read the name of the Software file from
the Application Image<Application_Image>fieldhlp field of the codeplug, and the user prompt
will ask for confirmation to write the codeplug and software to the terminal, or cancel the oper-
ation.
6. If confirmed, the Restore Radio function will proceed in the following order:
•
•
The writing progress for both the software and codeplug will be displayed on screen.
7. An appropriate message will be displayed, notifying the success or failure of this operation.
Note: If the backup file does not exist in the Backup directory, or if the software application file has
not been found in the SW directory, then an error message will be displayed to indicate the problem
and the operation will be aborted. The operation will also be impossible if the 'Application Image'
field of the codeplug is empty.
Outputs
Restored terminal.
7.7 Configure
This menu enables the computer preferences to be set.
7.7.1 Profile
This is a customer application for the customisation of the tool bars and is only cosmetic.
7.7.2 Customize
This option is used to set the default appearance of the CPS tool so that it will always open to the
user requirements.
September 2008
The software application will be written
Then the codeplug is written.
Chapter 3 - MTM800 Product Information Manual
3-25
6866537D87-F