Configuring The Software For The Visualization With Wincc Rt Advanced - Siemens SITOP PSU8600 Manual

5 Configuration and Settings
5.5 Configuring the software for the visualization with
WinCC RT Advanced
Note This chapter shows the required connection of the PLC tags with the help of HMI
tags. However, it will not discuss the commissioning of the SITOP PSU8600
faceplate. Information on this topic can be found in the documentation of the
library see
Table 5-5
No.
1.
2.
Shutdown IPCs in the SITOP PSU8600 Buffer Mode
Entry ID: 109737962, V1.2,
References in /5/).
Open the "Tag table_1500_Comfort" tag table of HMI Runtime in the project
navigation via "HMI_RT_1 > HMI tags > Tag Table".
Create the following tags new via "Add":

"alarm_history": Data type: Int, access type: Symbolic

"alarm_pending": Data type: Int, access type: Symbolic

"PSU_Data": Data type: PSU_DATA_1500 V0.0.9, Address: %DB1.X.0.0
Enter your created "HMI_Connection_1" as connection. Connect the PLC tags
"AlarmHistory" and "AlarmPending" from DB1 with the appropriate HMI tags.
10/2017
Action
29