Learning units
3.7 6. Step: Configuring the drive with HW Config
3.7
6. Step: Configuring the drive with HW Config
Procedure
Step
Activity
1
In the HW catalog, select the SIMATIC Technology >
PROFIBUS DP(DRIVE) > Drives > SIMODRIVE entry.
2
Select the drive component "SIMODRIVE 611 universal" from the tree structure of the HW Catalog.
3
Drag-and-drop this component to the master system of the
DP(DRIVE).
4
Enter PROFIBUS address "4", then confirm with "OK".
18
Result
The "Properties – PROFIBUS interface
SIMODRIVE 611 U DP2, DP3" dialog box
opens.
The "DP Slave Properties" dialog box opens.
CPU 317T-2 DP: Controlling a physical axis
Getting Started, 03/2008, A5E00251786-05