TransPocket 180
controls, connec-
tions and mech-
anical compon-
ents
(1)
(2)
(3)
(4)
(1)
(2)
(3)
NOTE!
If a remote control is connected to the power source:
▶
▶
(4)
(5)
(6)
(7)
(8)
Use of the current connections during manual metal arc welding (depending on
electrode type):
-
-
Use of the current connections during TIG welding:
-
-
Control panel
(-) current socket
with bayonet latch
TMC connection (TIG Multi Connector)
TransPocket 180 RC only - for connecting a remote control
"rc" appears on the power source display
the welding current can only be adjusted using the remote control
(+) current socket
with bayonet latch
Carrying strap
Cable strap
for holding the mains cable and the welding power-leads
Do not use to move the device!
Mains switch
Air filter
(+) current socket for electrode holder or grounding cable
(-) current socket for electrode holder or grounding cable
(+) current socket for grounding cable
(-) current socket for welding torch
(5)
(6)
(7)
(8)
23