Troubleshooting; Safety; Indicated Errors; Service Messages - Fronius TransPocket 150 Operating Instructions Manual

Troubleshooting

Safety

Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electric current.
This can result in serious injury or death.
▶
▶
▶
Electrical current hazard caused by an inadequate ground conductor connection.
This can result in serious injury and damage to property.
▶

Indicated errors

Overtemperature
"hot" appears in the display, the "Temperature" indicator lights up
Cause:
Remedy:
Service mes- When E and a 2 digit error number appear in the display (e.g. E02) and the "Error" indic-
sages ator lights up, this is an internal power source service code.
Example:
ing the adjusting dial.
WARNING!
All the work and functions described in this document must only be carried out by
trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system components,
especially the safety rules.
WARNING!
Turn the mains switch of the power source to the "O" position and disconnect the
power source from the mains supply.
Secure all the devices and components involved to prevent unintentional restarting.
After opening the device, use a suitable measuring instrument to check that electric-
ally charged components (such as capacitors) have been discharged.
WARNING!
Always use the original housing screws in the original quantity.
+
Operating temperature too high
Allow device to cool (do not switch off the device - the fan will cool it down)
It is also possible that several error numbers are present. These appear when turn-
43