Configure the LAN
C
ONFIGURE THE
From the
LAN Configuration
LAN as indicated by your system administrator. The default protocol
for the LAN port is bridged.
1
Select
LAN
on the menu bar, then select
Configuration
2
Configure the following parameters:
LAN Protocol
The LAN protocol is set to bridged and cannot be changed through the Web interface.
If you want to change the protocol to routed, use the command-line interface (go to
"Set Up the LAN" on page
14
LAN
page, configure the parameters for the
page.
104).
LAN Setup
under
[LAN Options]
MM701G and MM702G User Manual
LAN
LAN Setup
to access the
LAN