ADC MM701G User Manual page 27

Adc megabit modem user manual mm701g, mm702g
Hide thumbs Also See for MM701G:
Table of Contents

Advertisement

2
Select one of the following three DHCP server modes as indicated by your LAN
administrator, then click
Disabled
modem, you must enter a default gateway for each client on your LAN (such as PCs)
and also an IP address for a DNS server. Either the service provider or your LAN
administrator will provide you these IP addresses to enter in the Internet Protocol
(TCP/IP) setup for your PC (or other LAN clients). See
page 7
for information about how to access this dialog. The following is an example
of the dialog and fields that must be filled in (example is from Windows 2000; the
dialog for other operating systems may be slightly different).
MM701G and MM702G User Manual
Configure
:
DHCP server mode
is not enabled. If you do not enable DHCP server for the
Chapter 3: Configuring the LAN
"Assign IP Addresses" on
Set Internet protocol to: Use
the following IP address:
DHCP default gateway
IP address
DNS server IP address
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mm702g

Table of Contents