Table of Contents
Advertisement
Assign IP Addresses
Use the following steps to set up a management PC to be on the same subnet with the modem.
(The example shows instructions for a PC that is running Microsoft Windows 98 SE;
instructions for other operating systems may differ slightly.)
1
From the Windows desktop, click
Control Panel
2
From the
Control Panel
right). The
Network
3
From the
Configuration
4
The modem can be set up to serve IP addresses to devices on the LAN (DHCP server
feature). Do one of the following:
•
If DHCP server has not been enabled on the modem (default setting), select
IP address
•
If DHCP server has been enabled on the modem, select
automatically
5
Enter an
IP Address
the modem. Use an IP address in the range of 10.0.0.2 to 10.0.0.254.
6
Click
OK
to close the
7
Click
OK
to close the
8
Click
to restart the computer.
OK
8
Start
dialog.
dialog, double-click the
dialog is displayed.
tab, double-click
TCP/IP Network Configuration
for an Ethernet NIC
.
and go to
Step
6.
and
Subnet Mask
TCP/IP Properties
Network
dialog.
,
Settings
,
Control Panel
Network
icon (shown to the
TCP/IP
to display the
that places the management PC on the same subnet as
dialog.
to open the
TCP/IP Properties
dialog.
Specify an
Obtain an IP address
MM701G and MM702G User Manual
Advertisement
Table of Contents
