ADC MM701G User Manual page 57

2 To add a new SNMP community, do the following:
a On the SNMP Community List
displayed.
b Enter the following information for the SNMP community.
Name
Identification for this SNMP community. All keyboard characters are allowed for
this name, up to a maximum of 80 characters. You must add a community name
in this field to later edit or delete the SNMP community. This name in the
Community List
Access Privilege
The access allowed to this SNMP community. Accesses are either
(view-only access) or
c Click Add
(see page
MM701G and MM702G User Manual
page, click
table provides the link for editing or deleting the entry.
Write
. The new entry is added to and is displayed in the
48).
Chapter 5: Configuring System Parameters
Add a new community
(full view and write access).
. The following dialog is
SNMP
Read
SNMP Community List table
49