ADC MM701G User Manual page 161

Adc megabit modem user manual mm701g, mm702g
Hide thumbs Also See for MM701G:
Table of Contents

Advertisement

traps
UAS
UBR
UDP
upstream traffic
VCI
VCMUX
VC
VPI
VP
WAN
MM701G and MM702G User Manual
Autonomous, interrupt-driven, SNMP messages sent from a managed node to a
network management station to indicate that an event has occurred.
UnAvailable Seconds is the number of seconds during which the line is unavailable.
Unspecified Bit Rate is an ATM traffic type used for LAN traffic. When network
congestion occurs, the data is stored in a buffer until it can be sent.
User Datagram Protocol is a transport protocol used to map inbound traffic (from a
remote IP address) to an internal (LAN) IP address. Uses a protocol port number for
the destination at the remote location.
Communications from a user to a service provider.
Virtual Channel Identifier is a 16-bit field addressing identifier in the header of an ATM
cell used to route cell traffic. It identifies a particular VC link for a given VP.
Virtual Channel Multiplexer-based encapsulation used for networks with large
numbers of virtual channels making it practical to carry a single protocol per virtual
channel.
A Virtual Channel is a logical connection in the ATM network over which ATM cells are
transmitted.
Virtual Path Identifier is an 8-bit field addressing identifier in the header of an ATM
cell that is used to route cell traffic. It identifies a particular VP link.
A Virtual Path is a group of VCs carried between two points. The VP provides a means
of bundling traffic traveling in the same direction. VPs are defined by a unique VPI
value.
Wide Area Network is a network consisting of nodes located across a large
geographical area. Also, the connection between a service provider and MM Modem.
Appendix D: Glossary
153

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mm702g

Table of Contents