Wacom Cintiq 18SX Installation Manual page 41

The basic process for working with the OSD is as follows:
Press the Menu button to open the OSD main menu.
Use the + or – buttons to select an option. When the option you want to adjust is highlighted,
press the Enter button. The current settings and adjustment sub-menu for that option will
appear.
Use the + or – buttons to adjust the option settings.
When you have made your changes, press the Enter button to save. To exit, press the
Menu button.
Notes: All settings are automatically saved when the OSD menu closes. If you make changes
to the display appearance and cannot return to the original settings, use the Reset Recall
option to return Cintiq to its original factory defaults.
When you open the On Screen Display (OSD), the following menu options are displayed as icons:
Contrast Select to
increase or decrease
image contrast.
Phase (VGA only)
Select to reduce or
eliminate horizontal
distortion lines.
To automatically
adjust, use the
Reset option.
Brightness Select to
increase or decrease
image brightness.
Pitch (VGA only)
Select to reduce or
eliminate vertical
distortion lines.
To automatically
adjust, use the
Reset option.
39