Power Supply - Wacom Cintiq 18SX Installation Manual

Power Supply

Input voltage:
Output voltage:
Grip Pen (Model UP-911E)
Pressure levels:
Pen tip travel:
Eraser tip travel:
Physical dimensions:
Weight:
Side switch type:
Display Adaptors
VGA to DVI-I adaptor:
DVI-D to DVI-I adaptor:
Accessories
Extra pen tip:
Pen stand:
100 to 240 VAC, 50/60 Hz
18 VDC, 4.0 A
512
0.1 mm (0.004 in) or less
2 mm (0.08 in), approximately
159.0 x 14.0 mm (6.26 x 0.55 in)
16 g (0.56 oz)
Rocker switch
Part number 88741-9100, Molex
Video card connection: VGA (RGB analog, male)
Display connection: DVI-I, female
Note: Use of this adaptor requires setting the Cintiq DVI/VGA
switch to the VGA position.
Part number 88741-9400, Molex
Video card connection: DVI-D, male
Display connection: DVI-I, female
Notes: Use of this adaptor requires setting the Cintiq Digital/Analog
(DVI/VGA) switch to the DVI position. Using a 3rd party ADC to
DVI-D adaptor requires the use of this adaptor as a secondary
adaptor for the Cintiq 18SX Interactive Pen Display.
PSI-A007
PST-A026-03
57