Step 7 - Assembling Fan Blades - Hunter Fans Installation And Operation Manual

®

STEP 7 - ASSEMBLING FAN BLADES

Hunter fans use several styles of fan
blade irons (brackets that hold the
blade to the fan).
1. Your fan may include blade grom-
mets (see Parts List). If your fan
has grommets, insert them by
hand into the holes as shown in
Figure 7a.
2. Attach each blade to blade iron
using three blade assembly screws
as shown in Figure 7b. Some fans
Grommet
Fan
Blade
Figure 7a - Inserting Grommet into Fan
Blade
16
feature a decorative medallion as
well as a blade iron. Insert the
assembly screws into the blade
iron, through the blade and into
the medallion, with the blade
sandwiched between the blade
iron and medallion as shown in
Figure 7c.
Figure 7b - Attaching Fan Blade to Blade
Iron
If you used grommets, the blades
may appear slightly loose after
screws are tightened. This is nor-
mal.
3. Remove the blade mounting
screws and rubber shipping
bumpers from the motor.
Blade
Iron
Medallion
Figure 7c - Attaching Fan Blade to Blade
Iron using Decorative Medallion
41557-01 3/12/2002