Table of Contents
Advertisement
Important:
Screw Right Pedal (8) into right crank
clockwise!
Screw Left Pedal (7) into Left crank
counter-clockwise!
Important:
Please make sure the right pedal matches
up with the right crank and the left pedal
matches up with the left crank.
If reversed the cranks may become
damaged or stripped.
Step 5
Loosen Nylon Nut (L)(102) and Nylon Nut (R)(101) from Left and Right Pedal
(7) &(8) first.
The Cranks, Pedals, Pedal Shafts and Pedal Straps are marked "R" for
Right and "L" for Left.
Insert the pedal shaft of Left Pedal (7) into threaded hole in the Left Crank (23).
Turn the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will
strip the threads.
Tighten the pedal shaft of Left Pedal (7) with the Wrench 13-15 provided, then
tighten Nylon Nut (L) (102) with Wrench 19mm provided.
Insert pedal shaft of Right Pedal (8) into threaded hole in Right Crank (24).
Turn the pedal shaft by hand in the clockwise direction until snug.
Tighten pedal shaft of Right Pedal (8) with the Wrench 13-15 provided then
tighten Nylon Nut (R) (101) with Wrench 19mm provided.
ASSEMBLY
Tool:
Wrench 19mm
12
1 PCS
Wrench 13-15
Advertisement
Table of Contents
