Exerpeutic 1110 Owner's Manual page 11

ASSEMBLY
Tool:
Allen Wrench with Phillips Screwdriver
Step 2
Remove four M6x12 Hexagon Socket Bolts (73) and four Ø6.2 Spring Washers
(74) from the Computer Bracket (4). Connect the Connection Wire A (15) from
the Computer Post (17) to the wire that comes from the Computer (9). Plug
Connection Wire D (94) from Computer Post (17) into receptacle on the back of
the Computer (9).
Slide the Computer Bracket (4) into the Computer Post (17). Re-install four
M6x12 Hexagon Socket Bolts (73) and four Ø6.2 Spring Washers (74) that were
removed. Tighten bolts with the Allen Wrench with Phillips Screwdriver provided.
9