Exerpeutic 1110 Owner's Manual page 13

ASSEMBLY
Tool:
Wrench 13-15
Allen Wrench with Phillips Screwdriver
Step 4
Remove four M8x45L Hexagon Socket Bolts (31) and four Ø8.2 Spring Washers
(80) from the Back Cushion Frame (78). Then attach the Back Cushion (77)
onto the Back Cushion Frame (78) with four M8x45L Hexagon Socket Bolts (31)
and four Ø8.2 Spring Washers (80) that were removed. Tighten bolts with the
Allen Wrench with Phillips Screwdriver provided.
Remove two Ø8.2xØ25x1.5t Flat Washers (32), two M8 Nylon Nuts (34), and
two M8x50L Carriage Bolts (81) from the Back Cushion Frame (78). Then
attach the Back Cushion Frame (78) onto the Seat Post (5) with two
Ø8.2xØ25x1.5t Flat Washers (32), two M8 Nylon Nuts (34), and two M8x50L
Carriage Bolts (81) that were removed. Tighten bolts and nuts with the Allen
Wrench with Phillips Screwdriver and Wrench provided.
Remove two Ø8.2xØ22.2 Curve Washers (30) and two M8x40L Hexagon Socket
Bolts (83) from the Handlebar (82). Then attach the Handlebar (82) onto the
Back Cushion Frame (78) with two Ø8.2xØ22.2 Curve Washers (30) and two
M8x40L Hexagon Socket Bolts (83) that were removed. Tighten bolts with the
Allen Wrench with Phillips Screwdriver provided.
Connect the Hand Pulse Wire (91) from the Handlebar (82) to the Connection
Wire B (92) from the Seat Post (5).
11