AJAX Hub 2 User Manual page 6

1 — Power Socket
2 — Ethernet socket
3, 4 — Slots for micro-SIM cards connection
3. Press and hold the power button for 2 seconds until the logo lights up. The
hub needs approximately 2 minutes to identify the available communication
channels. The bright green or white logo color indicates that the hub is
connected to Ajax Cloud.
If the Ethernet connection does not occur automatically, disable proxy, ltration by
MAC addresses and activate the DHCP in the router settings: the hub will receive an
IP address. During the next setup in the web or mobile app, you will be able to set a
static IP address.
4. To connect the hub to the GSM network, you need a micro SIM card with a
disabled PIN code request (you can disable it using the mobile phone) and a
su cient amount on the account to pay for the GPRS, SMS services and
calls. If the hub does not connect to Ajax Cloud via GSM, use Ethernet to set
up the network parameters in the app. For the proper setting of the access
point, username, and password, please contact the support service of the
operator.
Adding a hub to the Ajax app