Connecting Devices - AJAX Hub 2 User Manual

The room is created in the app using the Add Room menu.
Please assign a name for the room, and optionally, attach (or make) a photo: it
helps to nd the needed room in the list quickly.
By pressing on the gear button go to the room settings menu. To delete the
room, move all the devices to other rooms using the device setup menu.
Deleting the room erases all its settings.

Connecting Devices

During the rst hub registration in the app, you will be prompted to add devices
to guard the room. However, you can refuse and return to this step later.
The user can add the device only when the security system is disarmed!
Pairing device with hub:
Ajax app
1. In the , open the room and select Add Device.
2. Name the device, scan its QR code (or enter it manually), select a group (if group mode is
enabled).
3. Click Add — the countdown for you to add a device will begin.
4. When the app starts searching and launches countdown, switch on the device: its LED will blink
once. For detection and pairing to occur, the device should be located within the coverage area of
the wireless network of the hub (at a single protected object).