You have just acquired the Calibration Kit for the C.A 82xx and C.A 833x Power Quality Analyser series. Thank you for your confidence. To make optimum use of your instrument: Please read and respect the precautions for use in this User’s Manual. SYMBOLS USED ON THE INSTRUMENT Compliance with the “Low Voltage”...
C.A 8220, C.A 8230, C.A 8332/34, order to control adjustment and calibration routines C.A 8335 and AEMC 3943/45 power analysers. for voltage, current and power measurements (also continuity and temperature measurements with C.A...
• Microsoft .Net Framework 4.0 measurement. • A rotary switch for directing voltage input of the power analyser either towards the voltage output of the calibrator or towards the precision resistors (only for C.A 8220 adjustment). • Voltage current output cables...
4. USE 4.1 General information The software is exclusively Microsoft Windows- compatible (2000 SP4 , XP 32 bits or Vista 32 bits) and has to be installed on a personal computer to control the power analyser. It includes an install program which copies on the computer all the necessary files for the software execution.
Click the "Validation" button: The Chauvin-Arnoux internet support site will return a key allowing ID encryption as soon as possible. To enter the key after obtaining it, click the "Enter the key" button, and then enter the key in the corresponding fields.
(00 33) 02 31 64 51 55 (Manumesure Technical Centre) • (00 33) 01 44 85 44 85 (Chauvin Arnoux) 5.3.2 Repair outside metropolitan France. For any work, under warranty or out of warranty, send the instrument back to your distributor.
6. GENERAL CHARACTERISTICS 6.1 Casing 6.3 Environmental conditions 6.3.1 Climatic Casing: Polypropylene The conditions of ambient temperature and relative Two voltage input safety plugs. humidity are as follows: Connectors: Two current input safety plugs Two shunt output voltage safety plugs Switch: One four positions rotary switch Cables...
8. HOW TO ORDER POWER CALIBRATION KIT P01102132 The kit is composed of the following elements: One "Power Calibration Case" adjustment case. One CD ROM containing the "Power Calibration Manager" adjustment software and the user’s manual. One Safety Notice.
Page 12
Tel: +86 21 65 21 51 96 - Fax: +86 21 65 21 61 07 SCANDINAVIA - CA Mätsystem AB USA - Chauvin Arnoux Inc - d.b.a AEMC Instruments Sjöflygvägen 35 - SE 18304 TÄBY 200 Foxborough Blvd. - Foxborough - MA 02035...