Docking To The Ceiling Supply Unit - Dräger Atlan A300 Supplement Manual

6.2.3

Docking to the ceiling supply unit

The following describes docking to a ceiling supply unit with lifting function, e.g.,
Movita lift.
Prerequisite:
– If the device is docked with a ceiling supply unit with a key switch, the key switch
must be in the horizontal position.
1. Connect all necessary cables and hoses at the rear of the device:
– Central supply hoses (1)
– Power cable (2)
2. Check that the floor below the ceiling supply unit is level and cleared. There
must be no objects below the ceiling supply unit.
|
Supplement
Atlan A300, A350 ceiling-mounted versions and wall-mounted version
Ceiling-mounted version with integrated castors
55