Event Messages - JVC BD-X200E Instructions Manual

Event Messages

Event messages are displayed on the DVD recorder's LCD display and on the monitor when incorrect operations are attempted.
These messages will remain on-screen for approximately 3 seconds.
Monitor screen
TITLE FULL
04/05/04
11:20:00
LCD display
Monitor message
message
INVALID TV INVALId TV
TITLE FULL TITLE FULL
CHAPTER FULL CHAP FULL
NOT FINALIZE NoT FINAL
———— A L-xxxx-R
———— d L-xxxx-R
DURATION OVER ————
INVALID EDL ————
NO CASSETTE ————
NOT CONNECT ————
EDIT FAILURE ————
000 min
Event messages:
Displayed when
DISPLAY from
the DISPLAY
MENU screen is
set to ON.
REC
TITLE 1 0:11:22
CHAPTER 1 0:11:22
A signal of an invalid format has been input.
Alternatively, an attempt has been made to play a disc containing signals of an invalid
format.
Recording was attempted on a disc already containing 99 titles.
An attempt was made to add a chapter to a title already containing 99 chapters.
An attempt was made to eject a disc before it was finalized.
Set value is displayed when changing the recording level of analog audio.
Set value is displayed when changing the recording level of digital audio.
Auto Edit was carried out when the remaining disc space became insufficient during
RS-422A or DV remote operation.
An incorrect value was entered during the registration of an edit list (EDL).
During RS-422A remote operation, an attempt was made to control the connected
VCR while it did not contain a video tape.
During RS-422A or DV remote operation, a control operation was attempted while
no external device was connected.
Editing could not be completed normally.
LCD display
DOLBY DIGITAL
LPCM MPEG
Event message
Description
E-19