LifeSpan DT3 Quick Start page 2

FITNESS
Time
Step/Level
Calories
Distance
Speed
Weight
PROBLEM:
The console is erratic or not
lighting up.
SOLUTION:
Check to make sure the treadmill
is properly plugged in. Turn the
power switch off and make sure
the safety key is in place. Make
sure the console wire connector
is properly plugged in. Disconnect
the connections between the
treadmill and console. Then
plug them back together and
turn the power back on. If the
problem persists contact LifeSpan
Customer Service.
Customer Service: 877.654.3837 x 4
TROUBLESHOOTING
DT3 TREADMILL
Time
dc6
Step/Level
Calories
Distance
Speed
Weight
PROBLEM:
""UART" or " "dc-6" appears in
the display.
SOLUTION:
Turn the treadmill power
switch off. Unplug and re-plug
the console connector to the
treadmill. Turn the treadmill
power switch back on and check
to see if it functions properly.
Make sure the treadmill is
plugged into the wall socket and
not into an extension cord or
power strip.
Please see Owner's Manual section Maintenance and Tips for more information.
Time
E1
Step/Level
Calories
Distance
Speed
Weight
PROBLEM:
The treadmill motor seems
strained or E1 comes up after
several minutes of use.
SOLUTION:
This problem usually occurs when
there is too much friction building
between the treadmill belt and
deck. The best thing to do is turn
the treadmill off, lubricate the
running belt with 100% silicone
(non-aerosol), and turn the
treadmill back on. Test the unit.
If E1 still comes up after testing,
contact LifeSpan Customer Service.
Time
1 . 3
Step/Level
Calories
Distance
Speed
Weight
PROBLEM:
The treadmill speed feels too fast
or too slow.
SOLUTION:
Go into the Personal Settings
section and check if you are in
Metric or English mode. If you
are in the correct mode, contact
LifeSpan customer service.
lifespanfitness.com