Checking Before Installation; Check Items When Turning Off The Main Power; Product Name; Installation Outline Drawing - Canon 2/3 Hole Puncher Unit-A1 Service Manual

Checking Before Installation

Checking Before Installation

When installing this equipment together with the finisher, install this equipment before installing the finisher to the upstream
connection machine.

Check Items when Turning OFF the Main Power

Check that the main power switch is OFF.
1. Turn OFF the main power switch of the host machine.
2. Be sure that Control Panel Display and Main Power Lamp are both turned OFF, and then disconnect the power plug.

Product Name

Safety regulations require the product's name to be registered. In some regions where this product is sold, the following name
may be registered instead.
• F281060

Installation Outline Drawing

52
6. Installation