Canon 2/3 Hole Puncher Unit-A1 Service Manual page 65

14. Install the Punch Unit Fixing Pin.
• 1 Screw (W Sems ; M3x6)
1x
15. Connect the connector of the Punch Waste Full
Sensor Unit to the Punch Unit.
• 2 Cable guides
• 1 Connector
2x
1x
W Sems
(M3x6)
59
16. Connect the Relay Harness as shown in the figure.
• 2 Connectors
• 1 Cable guide
• 5 Wire saddles
2x
5x
6. Installation