Checking Before Installation
Check Items when Turning OFF the Main Power
Check that the main power switch is OFF.
1. Turn OFF the main power switch of the Host Machine.
2. Be sure that control panel display and main power lamp are both turned OFF, and then disconnect the power plug from the
outlet.
Points to Note on Installation
• Marked portion
When tightening the screws, do not tighten them too tightly. Otherwise, there is a risk of damage and deformation of screw
holes.
Product Name
Safety regulations require the product's name to be registered. In some regions where this product is sold, the following name
may be registered instead.
F281170
85
6. Installation