Knife Installation/Changing - Challenge CHAMPION 305 Instructions And Parts Manual

8.0 Knife Installation/Changing

8.0 Knife Installation/Changing
observed and extreme care is taken when handling knives.

Make sure knife lifters are properly installed, see instructions following.

Keep handling of unprotected knives to an absolute minimum.

Clear off cutter table before removing knife.

Have scabbard on cutter table and insert knife immediately.

Warn people of any unprotected knife.

Knife changing is a ONE PERSON OPERATION. Having more than one person trying to
change knives invites accidents.
The knife changing equipment shown in Figure 11 is included in the cutter tool kit. The following
instructions show how to remove and install a new or re-sharpened knife. Read these instructions AT
LEAST ONCE before attempting to actually change or install any blades.
22
Changing knives can be very dangerous unless safety precautions are
P/N: 47575
Figure 11 – Knife Changing Equipment
Figure 12