FP PostBase Installation Manual page 7

The PostBase franking machine
must restart before the settings
will become active. Touch
'C ' to restart it and test
ONTINUE
the connection.
PostBase will now continue its
installation routine....
If the machine cannot make a connection, the wizard will reappear after reboot-
ing your PostBase. In this case, you should first check the connections and then
the settings you have entered. You can also check the settings with your IT system
administrator. You may need to refer to the "PostBase Installation Guide -
Advanced corporate version for IT system administrators".
YOU WILL NEED TO ENTER YOUR MACHINE SPECIFIC
NUMBER INTO THE MACHINE WHEN PROMPTED, THIS CAN
BE FOUND IN YOUR FP WELCOME PACK.
R-PIN
7