Select Base; De-Register A Handset - VTech VT9011 User Manual

Using additional handsets
If registration is not successful first
time, please repeat the process again
in case the base registration period ran
out of time.
If there are already 5 handsets
registered to the base, the registration
will fail. You must de-register another
handset before you can register the
new one.
If your VT9011 handset is
registered to more than one base, you
can select which base to use.
If you have a handset registered to
more than one base and then de-
register it from one of them you will
need to re-select which base to use.
Until the base is selected the handset
will display
Saved.
At the base:
1. Press and hold . Till the phone emit "Beep" sound.
The handset is automatically assigned the next available
handset number.

Select base

1. Press , scroll
Menu
2. is highlighted. Press
H/set settings
3. Scroll to
Select base
4. is highlighted. Scroll
Base 1
want and press .
OK
5. Display shows 
Saved

De-register a handset

1. Press , scroll
Menu
2. is highlighted. Press
H/set settings
3. Scroll to
De-register
4. Enter the System PIN (original setting = 0000) and press
5. option is highlighted. Scroll
Select handset
to the handset you want and press
to and press
Settings
.
OK
and press .
OK
or to the base you
followed by the standby screen.
to and press
Settings
.
OK
and press .
OK
.
OK
.
OK
.
OK
.
OK
or
46