Table of Contents
Advertisement
Chapter 6
Done!
6 2
Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
How can I
do that?
3 Select the filtering rule to either block (recommended) or
allow the device(s) in the list.
To block/allow specific device(s)
1 ) Select
Block wireless access from the devices in the list
below
or
Allow wireless access only from the devices in
the list below
2 ) Click Add.
3 ) Enter the
MAC Address
paste the information from
device is connected to your network).
4 ) Enter the
Description
5 ) Select the check box to enable this entry, and click OK.
Now MAC Filtering is implemented to protect your wireless
network.
Block or allow specific client devices to access my network (via
wired or wireless).
1 Visit http://tplinkmodem.net, and log in with the password
you set for the router.
2 Go to
Advanced
Access Control.
and click Save.
manually. (You can copy and
Devices Online
of the device.
>
Security
>
Access Control
Network Security
table if the
and enable
23
Hide quick links:
Advertisement
Table of Contents
