Table of Contents
Advertisement
Chapter 12
12 1 3
Reserve LAN IP Addresses
You can view and add a reserved address for a client. When you specify an IP address
for a device on the LAN, that device will always receive the same IP address each time
when it accesses the DHCP server. If there are some devices in the LAN that require
permanent IP addresses, please configure Address Reservation on the router for the
purpose.
Follow the steps below to reserve an IP address for your device.
1
Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2
Go to
Advanced
3
Scroll down to locate the
reservation entry for your device.
4
Enter the
MAC address
5
Specify the IP address which will be reserved by the router.
6
Check to
Enable this entry
12 2
IPv6 LAN Settings
Based on the IPv6 protocol, the modem router provides two ways to assign IPv6 LAN
addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type
>
Network
>
LAN Settings
Address Reservation
of the device for which you want to reserve IP address.
and click
OK
Specify Your Network Settings
page and select IPv4.
table and click
to make the settings effective.
Add
to add an address
63
Hide quick links:
Advertisement
Table of Contents
