Table of Contents
Advertisement
Chapter 12
Done!
12 6
Create Static Routes
A static route is a pre-determined path that network information must travel to reach
a specific host or network. Data from one point to another will always follow the same
path regardless of other considerations. Normal internet usage does not require this
setting to be configured.
I want to:
4 Name the group.
5 Check the boxes of
Wi-Fi 2.4G
network and
LAN interface respectively.
6 Click
Enable Group Isolation
disallow other devices from communicating with them.
7 Click
OK
to save the settings.
Now your working devices connected to LAN1 and LAN3 are in
an isolated group!
Note: VLAN function is enabled by default. You cannot disable it when IPTV
is enabled.
Visit multiple networks and multiple servers at the same time.
For
example, in a small office, my PC can surf the internet, but I
also want to visit my company's server. Now I have a switch and
another router. I connect the devices as shown in the following
figure so that the physical connection between my PC and my
company's server is achieved. To surf the internet and visit my
company's network at the same time, I need to configure the
Specify Your Network Settings
LAN1
and
LAN3
in Available LAN. Here
Wi-Fi 5G
network are viewed as a
to isolate working devices and
74
Hide quick links:
Advertisement
Table of Contents
