Set Up An Ipv6 Connection - TP-Link Archer D50 User Manual

Chapter 4
1 Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2 Go to Advanced
3 Click Start to test the internet connectivity and you will see the test result in the
gray box.
4 4

Set Up an IPv6 Connection

If your ISP has provided a DSL line that supports IPv6 connection as well as some
detailed IPv6 parameters, you can manually set up an IPv6 connection.
If your ISP provides an IPv4-only connection or IPv6 tunnel service, permit IPv6
connection by referring to
Follow the steps below to set up an IPv6 connection:
1 Make sure you have set up an IPv4 connection by using Quick Setup wizard or
manually before setting up an IPv6 connection.
2 Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
3 Go to Advanced
> System Tools > Diagnostics
Set Up the IPv6
> Network > Internet
Set Up Internet Connections
page.
Tunnel.
page.
14