Chapter 12
2 Configuration on site A (local network).
1 ) Visit http://tplinkmodem.net, and log in with the password
you set for the modem router.
2 ) Go to
Advanced
configuration page. Click
3 ) In the
IPSec Connection Name
4 ) In the
Remote IPSec Gateway (URL)
B's WAN IP address.
5 ) Configure
Site A's
In the
Tunnel access from local IP addresses
take
Subnet Address
range of Site A in the
Subnet Mask
of Site A.
6 ) Configure
Site B's
In the
Tunnel access from local IP addresses
take
Subnet Address
Specify Your Network Settings
>
Network
>
IPSec VPN
Add
to set up a VPN tunnel.
column, specify a name.
column, Enter Site
LAN.
as an example. Then input the LAN IP
IP Address for VPN
LAN.
as an example. Then input the LAN IP
to open the
column, here we
column, and input
column, here we
78