The Back Panel - TP-Link Archer D50 User Manual

Chapter 1
2. If the internet LED is off, please check your ADSL LED first. If your ADSL LED is also off, please refer to
is ON, please check your internet configuration. You may need to check this part of information with your ISP and make sure
everything have been input correctly.
1 2 2

The Back Panel

The modem router's back panel shows the connection ports, buttons and antennas.
Refer to the following for detailed instructions.
Item
ADSL
WPS
WiFi
RESET
LAN1, LAN2, LAN3,
LAN4/WAN
USB
POWER ON/OFF
POWER
Antennas
For connecting the modem router to the internet. Connect the port to
the splitter or directly connect the port to the phone jack via a phone
cable. For details, please refer to
The switch for the WPS and RESET function.
For turning on/off the Wi-Fi function.
The switch for the RESET function.
There are two ways to reset the modem router's factory defaults.
Method one: With the modem router powered on, use a pin to press
and hold the RESET button for at least 8-10 seconds. And the modem
router will reboot to its factory default settings.
Method two: Restore the default settings from Backup & Restore of the
modem router's web management page.
For connecting the modem router to your PC or other Ethernet network
devices. In wireless router mode you will be able to connect to Cable/
FTTH/VDSL/ADSL devices.
For connecting to a USB storage device or a USB
The switch for the power. Press it to power on or off the modem router.
For connecting the modem router to power socket via the provided
power adapter.
Used for wireless operation and data transmit. Upright them for the
best Wi-Fi performance.
Get to Know Your Modem Router
Description
Connect Your Modem
printer.
Note 1. If your ADSL LED
Router.
5