TP-Link Archer D50 User Manual page 8

Chapter 1
Name
Power
ADSL
Internet
Wireless 2.4GHz
Wireless 5GHz
LAN
WPS
USB
Note:
1. If the ADSL LED is off, please check your internet connection first. Refer to Connect Your Modem Router for more information
about how to make internet connection correctly. If you have already made a right connection, please contact your ISP to make
sure your internet service is available now.
LED Explanation
Status
On System initialization is complete.
System initializing or firmware upgrading is in progress.
Flashing
Do not disconnect or power off the modem router.
Power is off. Please ensure that the power adapter is
Off
connected correctly.
On ADSL synchronization is complete.
Flashing ADSL synchronization is in progress.
ADSL synchronization failed. Please refer to Note 1 for
Off
troubleshooting.
The network is available with a successful internet
On
connection.
There is no successful internet connection or the
Off modem router is operating in Bridge mode. Please refer
to Note 2 for troubleshooting.
On The wireless 2.4GHz band is working properly.
Off The wireless 2.4GHz band is disabled.
On The wireless 5GHz band is working properly.
Off The wireless 5GHz band is disabled.
On At least one LAN port is connected.
Off No LAN port is connected.
A wireless device has been successfully added to the
On
network by WPS function.
WPS handshaking is in process and will continue for
about 2 minutes. Please press the WPS button on other
Flashing
wireless devices that you want to add to the network
while the LED is flashing.
A wireless device has failed to be added to the network
Off
by WPS function.
On The USB device is identified and ready to use.
Flashing The USB device is being identified.
Off No USB device is plugged into the USB port.
Get to Know Your Modem Router
Indication
4