TP-Link Ather D5 Installation Manual

Quick Installation Guide
AC1200 Wireless Dual Band Gigabit ADSL2+
Modem Router
D5

Connecting the Hardware

If you don't need the phone service, just directly connect the
modem router to the phone jack with a phone cable, then follow
steps 3 and 4 to complete the hardware connection.
Phone Jack
1
Connect the ADSL splitter
to the phone jack.
ADSL Splitter
Modem Router
2
Connect the modem router
to the ADSL splitter.
Connect to the phone (Optional)
Power Adapter
3
Turn on the modem router.
4
Verify that the hardware connection
is correct by checking these LEDs.
Power On ADSL On Wireless On
Note:
1. The ADSL LED takes about 1 to 2 minutes to stabilize.
2. If the Wireless LED is off, please press the Wi-Fi button on the rear
panel for 2 seconds, then check the LEDs again in a few seconds.