Table of Contents
Advertisement
Chapter 12
12 3 5
Advanced Wireless Settings
Advanced wireless settings are for those who have a network concept. If you are not
familiar with the settings on this page, it's strongly recommended that you keep the
provided default values; otherwise it may result in lower wireless network performance.
1
Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2
Go to
Advanced
•
Beacon Interval:
Enter a value between 200 and 1000 in milliseconds to determine the
duration between which beacon packets are broadcasted by the router to synchronize
the wireless network. The default is 200 milliseconds.
•
RTS Threshold:
Enter a value between 1 and 2346 to determine the packet size of
data transmission through the router. By default, the RTS (Request to Send) Threshold
size is 2346. If the packet size is greater than the preset threshold, the router sends
Request to Send frames to a particular receiving station and negotiates the sending
of a data frame, or else the packet will be sent immediately.
•
DTIM Interval:
Enter a value between 1 and 255 to determine the interval of the
Delivery Traffic Indication Message (DTIM). 1 indicates the DTIM Interval is the same
as
Beacon
Interval.
•
Group Key Update Period:
for the encryption key automatic renewal. The default is 0, indicating no key renewal.
>
Wireless
>
Advanced Settings
Enter the number of seconds to control the time interval
Specify Your Network Settings
page.
71
Hide quick links:
Advertisement
Table of Contents
