Redial List; Dial A Redial Entry; Delete A Redial Entry; Multiple Handset/Headset Use - VTech DECT 6.0 IS6100 User Manual

Telephone operation

Redial list

Each system handset stores the 20 most recently dialed numbers.
• When there are already 20 entries, the oldest entry is
deleted to make room for the new entry.
• Entries are shown in reverse chronological order.
Press REDIAL/
•
/CLEAR to exit the redial list.
• Press
OFF

Dial a redial entry

Press REDIAL/
1.
repeatedly to browse.
2. Press /
FLASh

Delete a redial entry

Press REDIAL/
1.
repeatedly to browse.
/REMOVE to delete the selected entry.
2. Press
MUTE

Multiple handset/headset use

You can use up to four system handsets, or three system handsets and
the headset at a time on an outside call. You can buy additional expansion
handsets (model LS6305) for this telephone base. You can register up to five
handsets, or four handsets and one headset to the telephone base.
To share an outside call:
• When a handset is already on a call, you can join the call by pressing
/ or
FLASh
To exit the call, press OFF/
•
base or charger, or press
The call continues until all handsets and/or the headset hang up.
to browse the redial list.
PAUSE
, then press /
PAUSE
or to dial the displayed number.
, then press /
PAUSE
on another handset, or
CLEAR
or place the headset in the headset charger.
/
,
VOL VOL CID
, or
VOL VOL
on the headset.
or place the handset in the telephone
28
or REDIAL/
PAUSE
/ or REDIAL/
CID PAUSE