VTech DECT 6.0 IS6100 User Manual page 62

Appendix
handset display screen messages
No line
No message
No signal,
call ended
Not available
at this time
Out of range OR
No pwr at base
** Paging **
Phone
Place in
charger
Rec mem full
Rec mem low
Ringer mute
Saved
Speaker
Unable to call.
Try again
Unable to save
XX Missed calls
XX New messages
There is no telephone line connected.
There are no messages in the answering system.
Communication between the handset and
telephone base is lost during a call.
One handset is already viewing the call log or
directory and another handset attempts to review it.
The handset cannot communicate with the
telephone base. Check the telephone base power
connection or move closer.
The system handset is being paged.
The handset is on a call.
The battery is very low. Place the handset in the
telephone base or charger for recharging.
The answering system has no recording time left.
The answering system has less than three minutes
of recording time left.
The ringer is muted temporarily during an incoming
or intercom call.
Your selection has been saved.
The handset speakerphone is in use.
You have attempted to make an intercom call, but
the handset you are calling is in the directory, in the
call log or out of range, or the handset or headset
you are calling is on an outside call.
You are attempting to save a caller ID entry without
a name and number.
There are calls that have not been reviewed in your
call log.
There are new messages in the answering system.
58