Mute; Temporary Ringer Silencing; Temporary Tone Dialing - VTech DECT 6.0 IS6100 User Manual

Telephone operation

Mute

The mute function allows you to hear the other party but
the other party cannot hear you.
On a handset:
During a call, press MUTE/
•
screen displays Muted for a few seconds and
displays until the mute function is turned off.
MUTE
Press MUTE/
•
REMOVE
conversation. The handset screen temporarily
displays Microphone ON.
On a headset:
• During a call, press MUTE/
headset beeps every 30 seconds until the mute function is turned off.
Press MUTE/
•
FLASh
announces, "Mute off."

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer of the
handset, headset or telephone base without disconnecting the call. The next
call rings normally at the preset volume.
To silence the handset ringer:
Press OFF/
•
CLEAR
then Ringer mute and
To silence the headset ringer:
Press MUTE/
•
FLASh
To silence the telephone base ringer:
Press VOL/
•

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
1. During a call, press
2. Use the dialing keys to enter the number. The telephone now sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing mode after you end
the call.
REMOVE
again to resume the
FLASh
again to resume the conversation. The headset
or MUTE/
REMOVE
display.
on the headset.
on the telephone base to turn off the base ringer.
on the handset.
TONE
. The handset
. The headset announces, "Mute on." The
on the handset,
25
Muted
3:15 MUTE 12/25
PM
Ringer mute