Cid Time Synchronization; Home Area Code - VTech DECT 6.0 IS6100 User Manual

Telephone settings

CID time synchronization

This feature allows the time and date to be set by incoming
caller ID information. The default setting is On.
Press MENU/
1.
Press /
2.
VOL
/SELECT.
press
MENU
Press /
3.
VOL
then press
MENU
Press /
4.
VOL
then press
MENU
5. Press /
VOL
/SELECT to confirm your selection. You
press
MENU
hear a confirmation tone.

home area code

If you dial your local calls using only seven digits (area code not required), you
can program your home area code so that when you receive a call within your
local area, the telephone number is automatically stored without the area code
in the call log.
1. Press MENU/
Press /
2.
VOL
/SELECT.
press
MENU
Press /
3.
VOL
> home area code, then press
4. Use the dialing keys to enter the desired home
area code.
• Press
MUTE
• Press and hold
entire entry.
/SELECT to confirm your selection. You
5. Press
MENU
hear a confirmation tone.
If, in the future, your telephone service provider requires you to dial the area
code when making a local call, or, if you move to a location that requires it,
delete the home area code you have already programmed, following the steps
above. After you have deleted the home area code, _ _ _ appears.
when the handset is not in use.
SELECT
to highlight > Settings, then
/
or
VOL CID
to highlight > Set date/time,
/
or
VOL CID
/SELECT.
to highlight > CID time sync,
/
or
VOL CID
/SELECT.
to choose > On or > Off, then
or /
VOL CID
when the handset is not in use.
SELECT
to highlight > Settings, then
/
or
VOL CID
/
or to highlight
VOL CID
/REMOVE or
OFF
/REMOVE to delete the
MUTE
/SELECT.
MENU
/CLEAR to delete a digit.
22
>Set date/time
Home area code
Date & time
>CID time sync
CID TIME SYNC
>On
>Home area code
Dial mode
HOME AREA CODE
___