Table of Contents
Advertisement
TO LIGHT THE STOVE
If the pilot is not already alight, light the pilot as described.
Slightly depress and turn the control knob anti-clockwise
from the pilot position to the maximum position (
Fig. 6). The fire will ignite.
Adjust the heat output as required by turning the control
knob clockwise towards the minimum position (
Fig. 7).
To ensure correct operation of the stove it is
recommended that is NOT operated below the minimum
setting.
Replace the control cover.
TO TURN THE STOVE OFF
Turn the gas control knob to the minimum gas rate
position (
) (Fig. 8), slightly depress the knob and
continue turning to the pilot position (
will go out, and the pilot will remain lit and may be left on
permanently.
PLEASE NOTE: If the fan is turned off at the control box
the pilot will be extinguished.
TO TURN THE STOVE
AND PILOT OFF
Turn the stove off as described. Depress the control
knob, turn to the off position (●) (Fig. 10) and the pilot will
go out.
Ensure that the fan is switched off.
POWER FAILURE
Should the stove be subject to a power cut. On
restoration of power the gas control will require resetting
manually (see page 5).
) (See
) (See
) (Fig. 9). The fire
6
FIG. 6
FIG. 7
FIG. 8
FIG. 9
FIG. 10
Advertisement
Table of Contents
