Aga-Rayburn Coalbrookdale Little Wenlock Gas Power Flue Installation And Servicing Instructions page 13

LAYING THE FUEL BED
Open the door of the stove (Using the tools supplied), see
Fig. 11) as follows:
1. Loosen the locking screw with the hex. driver.
2. Turn the door catch with the tool as illustrated.
Pour the aggregate into the burner tray as illustrated in
Fig. 12.
Fit the coal guard as illustrated in Fig. 12.
Do not compress or tap down. Any excess should be
kept and handed to the user for future use.
Positioning the Coals
Carefully place the coals on the coal bed as illustrated in
Figs. 13, 14 , 15 and 16.
Close the door and lock (Using the tools supplied).
WARNING: USE ONLY THE SIMULATED COALS
SUPPLIED WITH THE APPLIANCE TO BUILD THE BED.
UNDER NO CIRCUMSTANCES USE EXTRA COALS
FIG. 11
DESN 511305 A
OR PUT ANY OTHER MATERIALS ON THE FUEL BED.
DO NOT OPERATE THE STOVE WITH THE DOOR
OPEN OR IF THE GLASS IS CRACKED OR BROKEN.
THE DOOR CATCH IS HOT AND SHOULD ONLY BE
OPENED WITH THE TOOLS PROVIDED.
Hands should be washed after handling coals. (If gloves
are not used).
12