Ocp Status And Error Messages - Digital Equipment 5220 Series Service Maintenance Manual

OCP Status and Error Messages

Status Normal OCP Display
CPU ambient PROC1 temp=XXX C
temperature
PROC2 temp=XXX C
Power supply P/S1 OK
status
Fan status Sys fans OK
CPU status
OCP Error Description of
Display Error Display/Action
PROC 1 Temperature of Processor 1 is out of
overheat range.
PROC 2 Temperature of Processor 2 is out of
overheat range.
Action: Verify fans are operational.
P/S1 fail Power supply 1 is not working.
Action: Check that power supply
cables and connectors are connected
correctly.
Sys fan 1 fail Fan 1 is not working.
Sys fan 2 fail Fan 2 is not working.
Sys fan 3 fail Fan 3 is not working.
Sys fan 4 fail Fan 4 is not working.
Sys fan 5 fail Fan 5 is not working.
Action: Check that fan connectors are
connected correctly.
PROC 1 failure Internal defect of Processor 1 or
internal temperature exceeds the upper
limit .
PROC 2 failure Internal defect of Processor 1 or
internal temperature exceeds the upper
limit .
No PROC No processor(s) present in the server.
detected
PROC module Processor module failed.
fail
Troubleshooting
continued
4-17