RED ONE Quick Start Manual page 6

18. Install media.
• SD MEMORY: Insert supplied SD Memory Card at left front of camera.
• COMPACT FLASH: Insert REDFLASH ™ compact ash (CF) card at left rear of
camera.
• RED DRIVE®: Loosen thumb screws on sides of cradle assembly, slide into
v-blocks in cradle and tighten thumb screws. Connect 90˚ end of cable to RED
DRIVE® and straight end to DRIVE connector on rear of camera.
SD MEMORY
LOCATION
19. Assemble arm and install in desired location using short stud.
INSERTING
REDFLASH
ALIGN RED DRIVE SLOTS
WITH RAILS
AND SLIDE DOWNWARD
TURN
THUMB-SCREWS
TO LOCK/UNLOCK
(2 ON EACH SIDE)
SHOWN INSTALLED
ON TOP-MOUNT
*** TIP***
ONCE LOCKED, ONLY
LOOSEN ONE SIDE TO
LOCK/UNLOCK
TO EASE IN
INSERTION/EXTRACTION
RED ARM