RED ONE Quick Start Manual page 5

13. Install top handle (pointing toward rear of camera) using two (2) Allen bolts.
14. Assemble right handle, wing nuts and washers - do not tighten.
15. Slide right handle over front of either rod. Lock in place using wing nut.
NOTE:
POSITION HANDLE HORIZONTALLY
TO EASE IN ASSEMBLY
16. Working from front of camera, remove body cap from PL Mount by rotating retaining
ring counter-clockwise.
17. Mount and secure lens to PL Mount by inserting the tabs, (note notches and index pin)
and rotate retaining ring clockwise.
IMPORTANT: IF USING S4/I COMPATIBLE LENSES DATA PINS SHOULD BE
ORIENTED TO 12 O'CLOCK WHEN MOUNTING LENS TO ENSURE COMMU-
NICATION BETWEEN LENS AND CAMERA.
RIGHT HANDLE INSTALLED
TOP HANDLE
INSTALLED
FRONT
OF
CAMERA