Reset To Default Setting - Furuno FSS-3BB Installation Manual

3. INITIAL SETTINGS
3.8

Reset to Default Setting

To reset all customized settings to factory default settings, do the following procedure.
Note that the customized settings cannot be restored.
1. Click the [Settings] icon (
vanced Settings] icon (
2. Select [Service] from the menu on the left-hand side of the window.
The message "Ask your dealer to change service settings." appears.
3. Press and hold the [OK] button for approx. 10 seconds to open the service menu.
4. Click the [Restore Default Settings] button.
The following confirmation message appears.
5. Click the [Yes] button to restore factory default settings.
The equipment is automatically turned off. After the shutdown, press the power
key (
menu appears after restoring factory default settings and rebooting the system.
Set up the initial setting menu, referring to section 3.1.
3-18
) from the InstantAccess bar
).
Warning
All settings will be reset to default.
Are you sure?
Yes
) on the trackball control unit to turn the system on. The initial setting
No
™
, then click the [Ad-