Table of Contents
Advertisement
3. INITIAL SETTINGS
16. Select [LF] from the menu on the left-hand side of the window, then set up the LF
(low frequency) transducer in a similar manner.
17. Click the [Save/Exit] button.
The following confirmation message appears if the transducer settings are cor-
rect.
Note: If the transducer settings are not correct, the following message appears.
Click the [OK] button to close the message, then confirm the transducer settings.
18. Click the [Yes] button to turn the system off, then turn the system on.
3-4
Confirm
Shutting down. Check the installation status, then restart the
equipment.
Are you sure?
Yes
No
Warning
Transducer settings are not correct.
Check the settings.
OK
Hide quick links:
Advertisement
Table of Contents
