How To Take A Still Image Of The Rx Monitor; Model Data For The Identi-Fish ™ Graph - Furuno FSS-3BB Installation Manual

3.6

How to Take a Still Image of the RX Monitor

After the installation, take a still image of the RX monitor screen when the [Default Set-
ting] checkbox is checked, in a harbor test. The still image of the RX monitor screen
is used for checking the equipment in maintenance.
1. Click the [Settings] icon (
vanced Settings] icon (
2. Select the [Tests] from the menu on the left-hand side of the window.
The [Tests] menu appears on the right-hand side of the window.
3. Select the [Rx Monitor] from the [Tests] menu.
The RX monitor screen appears.
4. Check the checkbox for [Default Setting].
5. Press the wheel on the trackball to take a still image.
6. Click the [Close] button (
7. Press and hold the scrollwheel on the trackball control unit to open the replay
screen, then confirm that the still image that of the RX monitor screen is saved cor-
rectly.
3.7 Model Data for the IDENTI-FISH
The FSS-3BB compares the histograms of schools of fish with the model data within
the measurement range, and indicates the similarity of fish species by numerical val-
ues and bar graphs*. This graph is called the "IDENTI-FISH
of mackerel and herring are stored in the FSS-3BB. For how to set model data and
register fish species, see the operator's manual (OME-23930).
*: Requires the transducer compatible with the IDENTI-FISH
) from the InstantAccess bar
).
Rx Monitor
) to close the RX monitor screen.
3. INITIAL SETTINGS
™
, then click the [Ad-
Default Setting Noise Test
™
Graph
™
graph". Only model data
™
feature.
3-17