Furuno FSS-3BB Installation Manual page 13

1.3.1 Desktop mount
You can install the unit flat on the desktop, or use the fixing plate for a tilted installation.
How to mount the unit tilted
Use the supplied desktop fixing plate to mount the unit tilted.
1. Attach the desktop fixing plate to the trackball control unit, using the two washer
head screws (M3×8, supplied).
Washer head screw
2. Secure the unit using the two self-tapping screws (φ5×20, supplied).
How to install the unit flat on the desktop
Secure the trackball control unit without the desktop fixing plate to install the unit flat
on the desktop.
1. Drill four mounting holes of 4 mm diameter referring to the outline drawing at the
back of this manual.
(M3×8, 2 pcs)
Desktop fixing plate
Self-tapping screw
(Ø5×20, 2 pcs)
1. MOUNTING
1-5